SPECHT DUO Series Overview
SPECHT DUO – Double Productivity without Compromises
The SPECHT® DUO series with the same superior accuracy of the single-spindle machine With the “dynamic axis compensation“ in X/Y/Z, the two spindles are synchronized. Compensation of spindle displacement brings the accuracy of the single-spindle machine to the DUO machine. In combination with the temperature compensation from the machine to the workpiece, the SPECHT DUO is the most accurate dual spindle machine of its class. The fast “Dynamic Disc“ tool magazine ensures minimal idle times. The choice of gantry, frontal or manual loading provides for additional high flexibility.
In order to fully benefit from the productivity advantages of dual spindle machines, SPECHT DUO units are equipped with a unique compensation system. With the measurement compensation in all linear axes, both spindles of the DUO-machine can be positioned with micrometer accuracy to one another. In conjunction with the temperature compensation in the machine bed, on the axes, in the fixture and in the workpiece, constant and sustained accuracy is maintained. The result: “First Part = Good Part“, without machine warm-up.
Advantages of the SPECHT DUO Machines
> Large distances between the spindles for machining large workpieces (810 mm on the SPECHT 600 DUO)
> HSK-A63 motor spindle with speeds up to 18 000 rpm
> HSK-A100 motor spindle with up to 378 Nm / 38 kW
> Fast tool magazine (L chain + 2 discs) with high capacity (112 usable tool spaces)
> Chain magazine allows fitting on ground level without a podest
> Unique chip-to-chip time of less than 2.5 seconds on the SPECHT 450 DUO
> Smallest surface area requirement due to compact design (only 11.2 m² for the SPECHT 450 DUO)
> Compensation in all axes (X / Y / Z) – worldwide unique precision for duo spindle machines
> Highest productivity per machine surface area
> Cost-effective periphery
> Portal, frontal or manual loading possible
> Worldwide unique ”dynamic axis compensation“ (X/Y/Z) brings the precision of the single-spindle machine to the DUO machine
> Wet processing to meet technological requirements possible just as 2-channel minimal quantity lubrication with highly precise dosing for environmentally friendly production
> Steep walls in the machine bed and chip tray ensure very good chip discharge in MQL machining
> Workpiece clamping with zero point clamping system or adapter plates – reduction of clamping elements, permanently high accuracy and fast changeover
> Synergy of multi-spindle implementation in one machine
> SPECHT 500 DUO / 600 DUO also with linear motors
> Short chip-to-chip times at high tool capacity
Specifications subject to change without prior notice
